7.0;as (arrow_scale) *DM*, revision 7.0, 83/08/08
AS (ARROW_SCALE) -- Set scale factors for arrow keys.
usage: as [x[y]]
FORMAT
AS [x[y]]
The AS command sets scale factors for the arrow keys. The scale factor is
useful for changing the apparent sensitivity of the arrow keys and for lining
up the edges of windows after moving them.
ARGUMENTS
If no arguments are specified, then the default scale factors are used, as
described below.
x
(optional) Specify horizontal scale factor in raster units (integer).
This value must be in the range 0-1023. (Note, however,
that portrait displays may only display up to 800 raster
units in this dimension.) There are approximately 100
raster units per inch. The default horizontal movement is
the width of the character on which the cursor rests; if
the cursor is not on a character, the DM uses the width of
a space in the last window. Specifying 0 for 'x' indicates
that the default should be used.
Default if omitted: 0
y
(optional) Specify vertical scale factor in raster units (integer).
This value must be in the range 0-1023. (Note, however,
that landscape displays may only display up to 800 raster
units in this dimension.) The default vertical movement is
the height of a line in the last window. Specifying 0 for
'y' indicates that the default should be used.
Default if omitted: leave current y value unchanged