SCCSFILE(4) DOMAIN/IX Reference Manual (SYS5) SCCSFILE(4)
NAME
sccsfile - format of Source Code Control System (SCCS) file
DESCRIPTION
An SCCS file is an ASCII file. It consists of six logical
parts: the checksum, the delta table (contains information
about each delta), user names (contains login names and/or
numerical group IDs of users who may add deltas), flags
(contains definitions of internal keywords), comments (con-
tains arbitrary descriptive information about the file), and
the body (contains the actual text lines intermixed with
control lines).
Throughout an SCCS file there are lines which begin with the
ASCII SOH (start of heading) character (octal 001). This is
the control character and is represented graphically in
these pages as @. Any line described below which is not
depicted as beginning with the control character is
prevented from beginning with the control character.
Entries of the form DDDDD represent a five-digit string (a
number between 00000 and 99999).
Each logical part of an SCCS file is described in detail
below.
Checksum
The checksum is the first line of an SCCS file. The
form of the line is:
@hDDDDD
The value of the checksum is the sum of all characters,
except those of the first line. The @h provides a
magic number of (octal) 064001.
Delta table
The delta table consists of a variable number of
entries of the form:
@s DDDDD/DDDDD/DDDDD
@d <type> <SCCS ID> yr/mo/da hr:mi:se <pgmr> DDDDD DDDDD
@i DDDDD ...
@x DDDDD ...
@g DDDDD ...
@m <MR number>
.
.
.
@c <comments> ...
.
.
.
Printed 5/13/85 SCCSFILE-1
SCCSFILE(4) DOMAIN/IX Reference Manual (SYS5) SCCSFILE(4)
@e
The first line (@s) contains the number of lines
inserted/deleted/unchanged, respectively. The second
line (@d) contains the type of the delta (currently,
normal: D, and removed: R), the SCCS ID of the delta,
the date and time the delta was created, the login name
corresponding to the real user ID at the time the delta
was created, and the serial numbers of the delta and
its predecessor, respectively.
The @i, @x, and @g lines contain the serial numbers of
deltas included, excluded, and ignored, respectively.
These lines are optional.
The @m lines (optional) each contain one MR number
associated with the delta; the @c lines contain com-
ments associated with the delta.
The @e line ends the delta table entry.
User names
The list of login names and/or numerical group IDs of
users who may add deltas to the file, separated by
new-lines. The lines containing these login names
and/or numerical group IDs are surrounded by the brack-
eting lines @u and @U. An empty list allows anyone to
make a delta. Any line starting with a ! prohibits
the succeeding group or user from making deltas.
Flags
Keywords used internally (see admin(1) for more infor-
mation on their use). Each flag line takes the form:
@f <flag> <optional text>
The following flags are defined:
@f t <type of program>
@f v <program name>
@f i <keyword string>
@f b
@f m <module name>
@f f <floor>
@f c <ceiling>
@f d <default SID>
@f n
@f j
@f l <lock-releases>
@f q <user defined>
@f z <reserved for use in interfaces>
The t flag defines the replacement for the %Y%
SCCSFILE-2 Printed 5/13/85
SCCSFILE(4) DOMAIN/IX Reference Manual (SYS5) SCCSFILE(4)
identification keyword. The v flag controls prompting
for MR numbers in addition to comments; if the optional
text is present it defines an MR number validity check-
ing program. The i flag controls the warning/error
aspect of the ``No ID keywords'' message. When the i
flag is not present, this message is only a warning;
when the i flag is present, this message will cause a
``fatal'' error (the file will not be gotten, or the
delta will not be made). When the b flag is present
the -b keyletter may be used on the get command to
cause a branch in the delta tree. The m flag defines
the first choice for the replacement text of the %M%
identification keyword. The f flag defines the
``floor'' release; the release below which no deltas
may be added. The c flag defines the ``ceiling''
release; the release above which no deltas may be
added. The d flag defines the default SID to be used
when none is specified on a get command. The n flag
causes delta to insert a ``null'' delta (a delta that
applies no changes) in those releases that are skipped
when a delta is made in a new release (e.g., when delta
5.1 is made after delta 2.7, releases 3 and 4 are
skipped). The absence of the n flag causes skipped
releases to be completely empty. The j flag causes get
to allow concurrent edits of the same base SID. The l
flag defines a list of releases that are locked against
editing (get(1) with the -e keyletter). The q flag
defines the replacement for the %Q% identification key-
word. The z flag is used in certain specialized inter-
face programs.
Comments
Arbitrary text is surrounded by the bracketing lines @t
and @T. The comments section typically will contain a
description of the file's purpose.
Body The body consists of text lines and control lines.
Text lines do not begin with the control character,
control lines do. There are three kinds of control
lines: insert,~delete, and end, represented by:
@I DDDDD
@D DDDDD
@E DDDDD
respectively. The digit string is the serial number
corresponding to the delta for the control line.
RELATED INFORMATION
admin(1), delta(1), get(1), prs(1)
Printed 5/13/85 SCCSFILE-3