OSF

NAME

XmToggleButton — the ToggleButton widget class.

SYNOPSIS

#include <Xm/ToggleB.h>

DESCRIPTION

ToggleButton sets nontransitory state data within an application.  Usually this widget consists of an indicator (square or diamond) with either text or a pixmap on one side of it.  However, it can also consist of just text or a pixmap without the indicator. 

The toggle graphics display a 1-of-many or N-of-many selection state.  When a toggle indicator is displayed, a square indicator shows an N-of-many selection state and a diamond indicator shows a 1-of-many selection state. 

ToggleButton implies a selected or unselected state.  In the case of a label and an indicator, an empty indicator (square or diamond shaped) indicates that ToggleButton is unselected, and a filled indicator shows that it is selected.  In the case of a pixmap toggle, different pixmaps are used to display the selected/unselected states. 

The default behavior associated with a ToggleButton in a menu depends on the type of menu system in which it resides.  By default, BSelect controls the behavior of the ToggleButton.  In addition, BMenu controls the behavior of the ToggleButton if it resides in a PopupMenu system.  The actual mouse button used is determined by its RowColumn parent. 

To accommodate the toggle indicator when created, Label’s resource XmNmarginLeft may be increased. 

Classes

ToggleButton inherits behavior and resources from Core, XmPrimitive, and XmLabel Classes. 

The class pointer is xmToggleButtonWidgetClass. 

The class name is XmToggleButton. 

New Resources

The following table defines a set of widget resources used by the programmer to specify data.  The programmer can also set the resource values for the inherited classes to set attributes for this widget.  To reference a resource by name or by class in a .Xdefaults file, remove the XmN or XmC prefix and use the remaining letters.  To specify one of the defined values for a resource in a .Xdefaults file, remove the Xm prefix and use the remaining letters (in either lowercase or uppercase, but include any underscores between words).  The codes in the access column indicate if the given resource can be set at creation time (C), set by using XtSetValues (S), retrieved by using XtGetValues (G), or is not applicable (N/A). 

XmNarmCallback
Specifies the list of callbacks called when the ToggleButton is armed. To arm this widget, press the active mouse button while the pointer is inside the ToggleButton. For this callback, the reason is XmCR_ARM. 

XmNdisarmCallback
Specifies the list of callbacks called when ToggleButton is disarmed. To disarm this widget, press and release the active mouse button while the pointer is inside the ToggleButton. This widget is also disarmed when the user moves out of the widget and releases the mouse button when the pointer is outside the widget. For this callback, the reason is XmCR_DISARM. 

XmNfillOnSelect
Fills the indicator with the color specified in XmNselectColor and switches the top and bottom shadow colors when set to True.  Otherwise, it switches only the top and bottom shadow colors. 

XmNindicatorOn
Specifies that a toggle indicator is drawn to one side of the toggle text or pixmap when set to True.  When set to False, no space is allocated for the indicator, and it is not displayed.  If XmNindicatorOn is True, the indicator shadows are switched when the button is selected or unselected, but, any shadows around the entire widget are not switched.  However, if XmNindicatorOn is False, any shadows around the entire widget are switched when the toggle is selected or unselected. 

XmNindicatorSize
Sets the size of the indicator.  A value of XmINVALID_DIMENSION causes the indicator to be set to the size of the font of the label string.

XmNindicatorType
Specifies if the indicator is a 1-of or N-of indicator.  For the 1-of indicator, the value is XmONE_OF_MANY.  For the N-of indicator, the value is XmN_OF_MANY.  The N-of-many indicator is square.  The 1-of-many indicator is diamond shaped.  This resource specifies only the visuals and does not enforce the behavior.  When the ToggleButton is in a RadioBox, the default is XmONE_OF_MANY; otherwise, the default is XmN_OF_MANY. 

XmNselectColor
Allows the application to specify what color fills the center of the square or diamond-shaped indicator when it is set. If this color is the same as either the top or the bottom shadow color of the indicator, a one-pixel-wide margin is left between the shadows and the fill; otherwise, it is filled completely. This resource’s default for a color display is a color between the background and the bottom shadow color.  For a monochrome display, the default is set to the foreground color. The meaning of this resource is undefined when XmNindicatorOn is False. 

XmNselectInsensitivePixmap
Specifies a pixmap used as the button face when the ToggleButton is selected and the button is insensitive if the Label resource XmNlabelType is set to XmPIXMAP.  If the ToggleButton is unselected and the button is insensitive, the pixmap in XmNlabelInsensitivePixmap is used as the button face. 

XmNselectPixmap
Specifies the pixmap to be used as the button face if XmNlabelType is XmPIXMAP and the ToggleButton is selected.  When the ToggleButton is unselected, the pixmap specified in Label’s XmNlabelPixmap is used. 

XmNset
Displays the button in its selected state if set to True. This shows some conditions as active when a set of buttons first appears.

XmNspacing
Specifies the amount of spacing between the toggle indicator and the toggle label (text or pixmap).

XmNvalueChangedCallback
Specifies the list of callbacks called when the ToggleButton value is changed.  To change the value, press and release the active mouse button while the pointer is inside the ToggleButton.  This action also causes this widget to be disarmed. For this callback, the reason is XmCR_VALUE_CHANGED. 

XmNvisibleWhenOff
Indicates that the toggle indicator is visible in the unselected state when the Boolean value is True. When the ToggleButton is in a menu, the default value is False. When the ToggleButton is in a RadioBox, the default value is True.

Inherited Resources

ToggleButton inherits behavior and resources from the following superclasses.  For a complete description of each resource, refer to the man page for that superclass. 

Callback Information

A pointer to the following structure is passed to each callback:

typedef struct
{
intreason;
XEvent∗ event;
intset;
} XmToggleButtonCallbackStruct;

reasonIndicates why the callback was invoked

eventPoints to the XEvent that triggered the callback

setReflects the ToggleButton’s current state when the callback occurred, either True (selected) or False (unselected)

Translations

XmToggleButton includes translations from Primitive.  The XmToggleButton translations for buttons not in a menu system are listed below.  These translations may not directly correspond to a translation table. 

Note that altering translations in #override or #augment mode is undefined. 

BSelect Press:Arm()
BSelect Release:Select()
Disarm()
KHelp:Help()
KActivate:ArmAndActivate()
KSelect:ArmAndActivate()

XmToggleButton inherits menu traversal translations from XmLabel.  Additional XmToggleButton translations for ToggleButtons in a menu system are listed below.  In a Popup menu system, BMenu also performs the BSelect actions.  These translations may not directly correspond to a translation table. 

BSelect Press:BtnDown()
BSelect Release:BtnUp()
KHelp:Help()
KActivate:KeySelect()
KSelect:KeySelect()
MAny KCancel:MenuShellPopdownOne()

Action Routines

The XmToggleButton action routines are described below:

Arm():
If the button was previously unset, this action does the following: If XmNindicatorOn is True, it draws the indicator shadow so that the indicator looks pressed; if XmNfillOnSelect is True, it fills the indicator with the color specified by XmNselectColor.  If XmNindicatorOn is False, it draws the button shadow so that the button looks pressed.  If XmNlabelType is XmPIXMAP, the XmNselectPixmap is used as the button face.  Calls the XmNarmCallback callbacks. 

If the button was previously set, this action does the following: If both XmNindicatorOn and XmNvisibleWhenOff are True, it draws the indicator shadow so that the indicator looks raised; if XmNfillOnSelect is True, it fills the indicator with the background color.  If XmNindicatorOn is False, it draws the button shadow so that the button looks raised.  If XmNlabelType is XmPIXMAP, the XmNlabelPixmap is used as the button face.  Calls the XmNarmCallback callbacks. 

ArmAndActivate():
If the ToggleButton was previously set, unsets it; if the ToggleButton was previously unset, sets it.

In a menu, unposts all menus in the menu hierarchy, calls the XmNarmCallback callbacks, and calls the XmNvalueChangedCallback callbacks. 

Outside a menu, if the button was previously unset, this action does the following: If XmNindicatorOn is True, it draws the indicator shadow so that the indicator looks pressed; if XmNfillOnSelect is True, it fills the indicator with the color specified by XmNselectColor.  If XmNindicatorOn is False, it draws the button shadow so that the button looks pressed.  If XmNlabelType is XmPIXMAP, the XmNselectPixmap is used as the button face.  Calls the XmNarmCallback and XmNvalueChangedCallback callbacks. 

Outside a menu, if the button was previously set, this action does the following: If both XmNindicatorOn and XmNvisibleWhenOff are True, it draws the indicator shadow so that the indicator looks raised; if XmNfillOnSelect is True, it fills the indicator with the background color.  If XmNindicatorOn is False, it draws the button shadow so that the button looks raised.  If XmNlabelType is XmPIXMAP, the XmNlabelPixmap is used as the button face.  Calls the XmNarmCallback and XmNvalueChangedCallback callbacks. 

BtnDown():
This action unposts any menus posted by the ToggleButton’s parent menu, disables keyboard traversal for the menu, and enables mouse traversal for the menu. It draws the shadow in the armed state and calls the XmNarmCallback callbacks. 

BtnUp():
This action unposts all menus in the menu hierarchy. If the ToggleButton was previously set, unsets it; if the ToggleButton was previously unset, sets it. It calls the XmNvalueChangedCallback callbacks and then the XmNdisarmCallback callbacks. 

Disarm():
Calls the callbacks for XmNdisarmCallback. 

Help():
In a Pulldown or Popup MenuPane, unposts all menus in the menu hierarchy and restores keyboard focus to the tab group that had the focus before the menu system was entered. Calls the callbacks for XmNhelpCallback if any exist.  If there are no help callbacks for this widget, this action calls the help callbacks for the nearest ancestor that has them. 

KeySelect():
This action unposts all menus in the menu hierarchy. If the ToggleButton was previously set, unsets it; if the ToggleButton was previously unset, sets it. It calls the XmNarmCallback and XmNvalueChangedCallback callbacks. 

MenuShellPopdownOne():
In a toplevel Pulldown MenuPane from a MenuBar, unposts the menu, disarms the MenuBar CascadeButton and the MenuBar, and restores keyboard focus to the tab group that had the focus before the MenuBar was entered. In other Pulldown MenuPanes, unposts the menu.

In a Popup MenuPane, unposts the menu and restores keyboard focus to the widget from which the menu was posted. 

Select():
If the pointer is within the button, takes the following actions: If the button was previously unset, sets it; if the button was previously set, unsets it. Calls the XmNvalueChangedCallback callbacks. 

Additional Behavior

This widget has the additional behavior described below:

<EnterWindow>:
In a menu, if keyboard traversal is enabled, this action does nothing. Otherwise, it draws the shadow in the armed state and calls the XmNarmCallback callbacks. 

If the ToggleButton is not in a menu and the cursor leaves and then reenters the ToggleButton’s window while the button is pressed, this action restores the button’s armed appearance. 

<LeaveWindow>:
In a menu, if keyboard traversal is enabled, this action does nothing. Otherwise, it draws the shadow in the unarmed state and calls the XmNdisarmCallback callbacks. 

If the ToggleButton is not in a menu and the cursor leaves the ToggleButton’s window while the button is pressed, this action restores the button’s unarmed appearance. 

Virtual Bindings

The bindings for virtual keys are vendor specific.  For information about bindings for virtual buttons and keys, see VirtualBindings(3X). 

RELATED INFORMATION

Core(3X), XmCreateRadioBox(3X), XmCreateToggleButton(3X), XmLabel(3X), XmPrimitive(3X), XmRowColumn(3X), XmToggleButtonGetState(3X), and XmToggleButtonSetState(3X).