ftp(1c)
Name
ftp − file transfer program
Syntax
ftp [−v] [−d] [−i] [−n] [−g] [host]
Description
The ftp command is the user interface to the ARPANET standard File Transfer Protocol. The program allows a user to transfer files to and from a remote network site.
The client host with which ftp is to communicate may be specified on the command line. If the client host is specified on the command line, ftp immediately attempts to establish a connection to an FTP server on that host; otherwise, ftp enters its command interpreter and awaits instructions from the user. While ftp is awaiting commands from the user, it provides the user with the prompt ftp>. The following commands are recognized by ftp:
! Invokes a shell on the local machine.
$ macro-name [ args ]
Executes the macro macro-name that was defined with the macdef command. Arguments are passed to the macro unglobbed.
account [ passwd ]
Supplies a supplemental password required by a remote system for access to resources once a login has been successfully completed. If no argument is included, the user is prompted for an account password in a non-echoing input mode.
append local-file [ remote-file ]
Appends a local file to a file on the remote machine. If remote-file is not specified, the local file name is used in naming the remote file. File transfer uses the current settings for type, format, mode, and structure.
ascii Sets the file transfer type to network ASCII. This is the default type.
bell Arranges for a bell to sound after each file transfer command is completed.
binary Sets the file transfer type to support binary image transfer.
bye Terminates the FTP session with the remote server and exits ftp.
case Toggles the remote computer’s file name case mapping during mget commands. When case is on (default is off), the remote computer’s file names are written in the local directory with all letters in upper case mapped to lower case.
cd remote-directory
Changes the working directory on the remote machine to remote-directory.
cdup Changes the remote machine working directory to the parent of the current remote machine working directory.
close Terminates the FTP session with the remote server and returns to the command interpreter.
cr Toggles the carriage return stripping during ascii type file retrieval. Records are denoted by a carriage return/linefeed sequence during ascii type file transfer. When cr is on (the default), carriage returns are stripped from this sequence to conform with the UNIX single linefeed record delimiter. Records on non-UNIX remote systems may contain single linefeeds; when an ascii type transfer is made, these linefeeds may be distinguished from a record delimiter only when cr is off.
delete remote-file
Deletes the file remote-file on the remote machine.
debug [ debug-value ]
Toggles the debugging mode. If an optional debug-value is specified, it is used to set the debugging level. When debugging is on, ftp prints each command sent to the remote machine, preceded by the string q-->.
dir [ remote-directory ] [ local-file ]
Prints a listing of the directory contents in the directory, remote-directory, and, optionally, places the output in local-file. If no directory is specified, the current working directory on the remote machine is used. If no local file is specified, output comes to the terminal.
disconnect
A synonym for close.
form format
Sets the file transfer form to format. The default format is file.
get remote-file [ local-file ]
Retrieves the remote-file and stores it on the local machine. If the local file name is not specified, it is given the same name it has on the remote machine. The current settings for type, form, mode, and structure are used while transferring the file.
hash Toggles the hash-sign (#) printing for each data block transferred. The size of a data block is 1024 bytes.
glob Toggles filename expansion for mdelete, mget, and mput. If globbing is turned off with glob, the file name arguments are taken literally and not expanded. Globbing for mput is done as in csh(.). For mdelete and mget, each remote file name is expanded separately on the remote machine and the lists are not merged. Expansion of a directory name is likely to be different from expansion of the name of an ordinary file. The exact result depends on the foreign operating system and ftp server, and can be previewed by entering: mls remote-files. Neither mget nor mput is meant to transfer entire directory subtrees of files. That can be done by transferring a tar() archive of the subtree (in binary mode).
lcd [ directory ]
Changes the working directory on the local machine. If no directory is specified, the user’s home directory is used.
ls [ remote-directory ] [ local-file ]
Prints an abbreviated listing of the contents of a directory on the remote machine. If remote-directory is left unspecified, the current working directory is used. If no local file is specified, the output is sent to the terminal.
macdef macro-name
Defines a macro. Subsequent lines are stored as the macro macro-name; a null line (consecutive newline characters in a file or carriage returns from the terminal) terminates macro input mode. There is a limit of 16 macros and 4096 total characters in all defined macros. Macros remain defined until a close command is executed.
The macro processor interprets dollar signs ($) and backslashes (\) as special characters. A dollar sign ($) followed by a number (or numbers) is replaced by the corresponding argument on the macro invocation command line. A dollar sign ($) followed by an i signals the macro processor that the executing macro is to be looped. On the first pass, $i is replaced by the first argument on the macro invocation command line. On the second pass it is replaced by the second argument, and so on. A backslash (\) followed by any character is replaced by that character. Use the backslash (\) to prevent special treatment of the dollar sign ($).
mdelete remote-files
Deletes the specified files on the remote machine. If globbing is enabled, the specification of remote files will first be expanded using ls.
mdir remote-files local-file
Obtains a directory listing of multiple files on the remote machine and places the result in local-file.
mget remote-files
Retrieves the specified files from the remote machine and places them in the current local directory. If globbing is enabled, the specification of remote files will first be expanding using ls.
mkdir directory-name
Makes a directory on the remote machine.
mls remote-files local-file
Obtains an abbreviated listing of multiple files on the remote machine and places the result in local-file.
mode [ mode-name ]
Sets the file transfer mode to mode-name. The default mode is the stream mode.
mput local-files
Transfers multiple local files from the current local directory to the current working directory on the remote machine.
nmap [ inpattern outpattern ]
Sets or unsets the filename mapping mechanism. If no arguments are specified, the filename mapping mechanism is unset. If arguments are specified, remote filenames are mapped during mput commands and put commands which are issued without a specified remote target filename. If arguments are specified, local filenames are mapped during mget commands and get commands which are issued without a specified local target filename.
This command is useful when connecting to a non-UNIX remote computer with different file naming conventions or practices. The mapping follows the pattern set by inpattern and outpattern.
Inpattern is a template for incoming filenames (which may have already been processed according to the ntrans and case settings). Variable templating is accomplished by including the sequences $1, $2, ..., $9 in inpattern. Use a backslash (\) to prevent this special treatment of the dollar sign ($) character. All other characters are treated literally, and are used to determine the nmap inpattern variable values. For example, given inpattern $1.$2 and the remote file name mydata.data, $1 has the value mydata, and $2 has the value data.
The outpattern determines the resulting mapped filename. The sequences $1, $2, ...., $9 are replaced by any value resulting from the inpattern template. The sequence $0 is replace by the original filename. Additionally, the sequence [seq1,seq2] is replaced by seq1 if seq1 is not a null string; otherwise it is replaced by seq2. For example, the command nmap $1.$2.$3 [$1,$2].[$2,file] yields the output filename myfile.data for input filenames myfile.data and myfile.data.old, myfile.file for the input filename myfile, and myfile.myfile for the input filename .myfile. Spaces may be included in outpattern, as in the example: nmap $1 |sed "s/ *$//" > $1 . Use the backslash (\) to prevent special treatment of the dollar sign ($), left bracket ([), right bracket (]), and comma (,).
ntrans [ inchars [ outchars ] ]
Sets or unsets the filename character translation mechanism. If no arguments are specified, the filename character translation mechanism is unset. If arguments are specified, characters in remote filenames are translated during mput commands and put commands which are issued without a specified remote target filename. If arguments are specified, characters in local filenames are translated during mget commands and get commands which are issued without a specified local target filename.
This command is useful when connecting to a non-UNIX remote computer with different file naming conventions or practices. Characters in a filename matching a character in inchars are replaced with the corresponding character in outchars. If the character’s position in inchars is longer than the length of outchars, the character is deleted from the file name.
open host [ port ]
Establishes a connection to the specified host FTP server. If an optional port number is supplied, ftp attempts to contact an FTP server at that port. If the auto-login option is on (default), ftp automatically attempts to log the user in to the FTP server (see below).
prompt Toggles interactive prompting. Interactive prompting occurs during multiple file transfers to allow the user to retrieve or store files selectively. If prompting is turned off (default), any mget or mput transfers all files.
proxy ftp-command
Executes an ftp command on a secondary control connection. This command allows simultaneous connection to two remote ftp servers for transferring files between the two servers. The first proxy command should be an open, to establish the secondary control connection. Type the command proxy? to see other ftp commands executable on the secondary connection. The following commands behave differently when prefaced by proxy:
open will not define new macros during the auto-login process
close will not erase existing macro definitions
get and mget transfer files from the host on the primary control connection to the host on the secondary control connection
put, mput, and append transfer files from the host on the secondary control connection to the host on the primary control connection. Third party file transfers depend upon support of the ftp protocol PASV command by the server on the secondary control connection.
put local-file [ remote-file ]
Stores a local file on the remote machine. If remote-file is unspecified, the local file name is used in naming the remote file. File transfer uses the current settings for type, format, mode, and structure.
pwd Prints the name of the current working directory on the remote machine.
quit A synonym for bye.
quote arg1 arg2 ...
Sends the arguments that are specified, verbatim, to the remote FTP server. A single FTP reply code is expected in return.
recv remote-file [ local-file ]
A synonym for get.
remotehelp [ command-name ]
Requests help from the remote FTP server. If a command-name is specified it is supplied to the server as well.
rename [ from ] [ to ]
Renames the file from on the remote machine, to the file to.
reset Clears the reply queue. This command re-synchronizes command/reply sequencing with the remote ftp server. If the remote server violates the ftp protocol, resynchronization may be necessary.
rmdir directory-name
Deletes a directory on the remote machine.
runique Toggles storing of files on the local system with unique filenames. If a file already exists with a name equal to the target local filename for a get or mget command, a .1 is appended to the name. If the resulting name matches another existing file, a .2 is appended to the original name. If this process continues up to .99, an error message is printed, and the transfer does not take place. The generated unique filename will be reported. Note that runique will not affect local files generated from a shell command (see below). The default value is off.
send local-file [ remote-file ]
A synonym for put.
sendport Toggles the use of PORT commands. By default, ftp attempts to use a PORT command when establishing a connection for each data transfer. If the PORT command fails, ftp uses the default data port. When the use of PORT commands is disabled, no attempt is made to use PORT commands for each data transfer. This is useful for certain FTP implementations which do ignore PORT commands but, incorrectly, indicate that they have been accepted.
status Shows the current status of ftp.
struct [ struct-name ]
Sets the file transfer structure to struct-name. By default the file structure is used.
sunique Toggles storing of files on a remote machine under unique file names. The remote ftp server must support the ftp protocol STOU command for successful completion of this command. The remote server reports the unique name. Default value is off.
tenex Sets the file transfer type to that needed to talk to TENEX machines.
trace Toggles packet tracing.
type [ type-name ]
Sets the file transfer type to type-name. If no type is specified, the current type is printed. The default type is network ASCII.
user user-name [ password ] [ account ]
Identifies the user to the remote FTP server. If the password is not specified and the server requires it, ftp disables the local echo and then prompts the user for it. If an account field is not specified, and the FTP server requires it, the user is prompted for it also. Unless ftp is invoked with auto-login disabled, this process is done automatically on initial connection to the FTP server.
verbose Toggles the verbose mode. In verbose mode, all responses from the FTP server are displayed to the user. In addition, if verbose is on, statistics regarding the efficiency of a file transfer are reported when the transfer is complete. By default, verbose is on.
? [ command ]
A synonym for help.
Command arguments which have embedded spaces may be quoted with quotation (") marks.
Aborting A File Transfer
To abort a file transfer, use the terminal interrupt key (usually <CTRL/C>). Sending transfers are halted immediately. Receiving transfers are halted by sending a ftp protocol ABOR command to the remote server, and discarding any further data received. The speed at which this is accomplished depends upon the remote server’s support for ABOR processing. If the remote server does not support the ABOR command, an ftp> prompt appears when the remote server has completed sending the requested file.
The terminal interrupt key sequence is ignored when ftp has completed any local processing and is awaiting a reply from the remote server. A long delay in this mode may result from ABOR processing, or from unexpected behavior by the remote server, including violations of the ftp protocol. If the delay results from unexpected remote server behavior, the local ftp program must be killed by hand.
File-naming Conventions
Files specified as arguments to ftp commands are processed according to the following rules:
1) Standard input is used for reading and standard output is used for writing when the file name is specified by a minus sign (−).
2) If the first character of the file name is a vertical line (|), the remainder of the argument is interpreted as a shell command. The ftp command then forks a shell, using popen() with the argument supplied, and reads (writes) from the stdout (stdin). If the shell command includes spaces, the argument must be quoted, as in “"| ls -lt"”. A particularly useful example of this mechanism is: “dir |more”.
3) If globbing is enabled, local file names are expanded according to the rules used in the csh() (compare to the glob command). If the ftp command expects a single local file, such as put, only the first filename generated by the globbing operation is used.
4) For mget commands and get commands with unspecified local file names, the local filename is the remote filename and can be altered by a case, ntrans, or nmap setting. The resulting filename may then be altered if runique is on.
5) For mput commands and put commands with unspecified remote file names, the remote filename is the local filename and may be altered by a ntrans or nmap setting. The resulting filename can then be altered by the remote server if sunique is on.
File Transfer Parameters
Many parameters can affect a file transfer. The type can be ascii, image (binary), ebcdic, or local byte size (for PDP-10’s and PDP-20’s generally). The ftp command supports the ascii and image types of file transfer and local byte size 8 for tenex mode transfers.
The ftp command supports only the default values for the remaining file transfer parameters: mode, form, and struct.
The .netrc File
The .netrc file contains login and initialization information used by the auto-login process. It resides in the user’s home directory. The following tokens are recognized; they may be separated by spaces, tabs, or new-lines:
machine name
Identifies a remote machine name. The auto-login process searches the .netrc file for a machine token that matches the remote machine specified on the ftp command line or as an open command argument. Once a match is made, the subsequent .netrc tokens are processed, stopping when the end of file is reached or another machine token is encountered.
login name
Identifies a user on the remote machine. If this token is present, the auto-login process initiates a login using the specified name.
password string
Supplies a password. If this token is present, the auto-login process supplies the specified string if the remote server requires a password as part of the login process. Note that if this token is present in the .netrc file, and if the .netrc is readable by anyone other than the user, ftp aborts the auto-login process.
account string
Supplies an additional account password. When this token is present, the auto-login process supplies the the remote server with an additional account password if the remote server requires it. If it does not, the auto-login process initiates an ACCT command.
macdef name
Defines a macro. This token functions like the ftp macdef command. A macro is defined with a specified name; its contents begin with the next .netrc line and continue until a null line (consecutive new-line characters) is encountered. If a macro named init is defined, it is automatically executed as the last step in the auto-login process.
Options
−dEnables debugging.
−gDisables file name expansion.
−iDisables interactive prompting during multiple file transfers.
−nDisables autologin during an initial connection. If auto-login is enabled, ftp will check the .netrc file in the user’s home directory for an entry describing an account on the remote machine. If no entry exists, ftp will use the login name on the local machine as the user identity on the remote machine, prompt for a password and, optionally, an account with which to login.
−vDisplays all responses from the remote server as well as all data transfer statistics.
Restrictions
Correct execution of many commands depends on proper behavior by the remote server.
The ftpd server prevents the unauthorized users listed in the /etc/ftpusers file from transferring files.
An error in the treatment of carriage returns in the 4.2BSD UNIX ascii-mode transfer code has been corrected. This correction may result in incorrect transfers of binary files to and from 4.2BSD servers using the ascii type. Avoid this problem by using the binary image type.
Files
/etc/ftpusersContains the list of unauthorized users