net(8) CLIX net(8)
NAME
net - Sets a local network entity title
SYNOPSIS
net [title]
FLAGS
title The network entity title, which is the local network service
access point (NSAP) address.
DESCRIPTION
Sets the local IP network entity title, and/or reads back the current
value.
EXAMPLES
The following example shows how to set a specific local network entity
title:
net 47000400060001020701012b5500
NOTES
The network entity title defaults to the value specified when the OSI/LAN
package was installed. Use this utility to change the default value.
DIAGNOSTICS
usage: net [local-Network-Entity-Title]
Cause: the command line was entered incorrectly.
Action: reenter the command line with a single network entity
title specified.
net: no network layer in this kernel
Cause: the TP4/IP driver is not present.
Action: Install OSI/LAN.
net: invalid address length n
Cause: the Network entity title you entered was too long or it
contained an odd number of characters.
Action: check the Network entity title and reenter the corrected
command line. The address must contain an even number of
hexadecimal characters (since a byte consists of two digits), and
2/94 - Intergraph Corporation 1
net(8) CLIX net(8)
its length must be 40 characters or less.
net: invalid hexadecimal character c in address
Cause: the Network entity title you entered contained a character
that was not a valid hexadecimal digit.
Action: check the Network entity title, and reenter the command
line. Network entity titles must contain only the characters 0 - 9
and a - f (or A - F).
RELATED INFORMATION
Intergraph ISO/OSI Administrator's Guide
2 Intergraph Corporation - 2/94