odlabel(8)                          CLIX                          odlabel(8)



  NAME

    odlabel - Creates an optical disk file system and labels an optical disk
    volume

  SYNOPSIS

    odlabel special volume

  DESCRIPTION

    The odlabel command initializes a volume by labeling it with the name
    volume and initializing the basic file system data structures.  It assumes
    that a platter is in the drive and that the drive has been spun up.

    The special specification is the /dev/rdsk device that is associated with
    the drive the volume is loaded into.  The value of volume is the label
    name.  A volume is one side of an optical disk platter.  Volumes are not
    partitioned.  Each volume contains a root directory and a tree of user-
    defined subdirectories.

  EXAMPLES

    To initialize the volume archive_a that is loaded into the disk SCSI 3 and
    unit 0 drive, key in the the following command:

    odlabel /dev/rdsk/odss3u0 archive_a


  FILES

    /dev/rdsk/*

  DIAGNOSTICS

    All messages are self-explanatory.

  EXIT VALUES

    The odlabel command exits with a value of 0 if successful.  If
    unsuccessful, it exits with a nonzero value.

  RELATED INFORMATION

    Commands:  odmount(1), odintro(1)

    Files:  STANDCFG(4)







  2/94 - Intergraph Corporation                                              1