lliconfig(ADM)                  19 June 1992                  lliconfig(ADM)


 Name

    lliconfig - display all LLI drivers currently configured on the system

 Syntax

    lliconfig

 Description

    The lliconfig utility lets you see which LLI drivers are currently con-
    figured on your system.  lliconfig displays each driver board's name,
    interrupt vector, I/O address, and RAM address (if any).  The utility
    also shows how the LLI chains are configured.

 Examples

    Here is sample output from lliconfig:

       The following LLI drivers are configured:
            Board   Interrupt   IO Addr    RAM Addr     DMA Channel
            e3B0    3           300        0-0            none
            wdn0    2 (9)       240        d0000-d1fff    none

       The following LLI chains are configured:
            Driver           Configured under
            e3B0                     netconfig (nbe)
            wdn0                     mkdev


    In this example, the 0-0 in the RAM address column for the e3B0 board
    indicates that the board does not have a RAM address.  The (9) in the
    interrupt vector column for the wdn0 board indicates that interrupt vec-
    tor 2 is sometimes referred to as 9.

 Files

    /etc/lliconfig

 See also

    mkdev(ADM,) netconfig(ADM)