jbrelabel(8)                        CLIX                        jbrelabel(8)



  NAME

    jbrelabel - Relabels a Read/Write optical disk cartridge

  SYNOPSIS

    /usr/bin/jbrelabel old_vol1  old_vol2  new_vol1  new_vol2

  DESCRIPTION

    The jbrelabel command verifies the volume names old_vol1 and old_vol2 and
    initializes each volume, using new_vol1 and new_vol2 as volume names.  The
    new volume names are entered in the Jukebox Manager (JBM) database and are
    ready for use.

  EXAMPLES

    To change these names on an optical disk cartridge from side_a and side_b
    to vol_a and vol_b, key in the following command:

    jbrelabel side_a side_b vol_a vol_b


  NOTES

    The jbrelabel command requires superuser privileges.

  DIAGNOSTICS

    Error messages will be issued in the event of an unsuccessful completion
    of the command.  The following list includes some of the more common error
    messages:

    JBM and/or jbinterface is not running
           The application program cannot start because it finds that JBM is
           not running.


    cannot open jukebox drive
           The utility has failed to open related device file for the drive.


    Volume not found

    First volume not found

    Second volume not found
           The specified volume name(s) cannot be found in the volume
           database.  Check spelling or use jbconfig(8) to look for the volume
           names.




  2/94 - Intergraph Corporation                                              1

  jbrelabel(8)                        CLIX                        jbrelabel(8)



  EXIT VALUES

    The jbrelabel command exits with a value of 0 if successful.  If
    unsuccessful, it exits with a nonzero value.

  RELATED INFORMATION

    Commands:  jblabel(8), jbconfig(1), eolabel(8)

    Files: JBCFG(4)












































  2                                              Intergraph Corporation - 2/94